Addonics Technologies RCHDSAES Gebruikershandleiding - Pagina 3

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Addonics Technologies RCHDSAES. Addonics Technologies RCHDSAES 4 pagina's. Ruby combo hard drive

Pagina afdrukken

Model: RCHDSAES

*Note: The Ruby combo hard drive with the eSATA interface must be connected

to a SATA controller with hot swap capability in order to add and remove drive

cartridge without rebooting. Please consult your motherboard or the add-in card

manufacturer to determine hot swap support on your SATA controller. All of the

Addonics SATA Host Controllers are hot swap capable.

For External Application:

Power adapter

Step 1: Connect the eSATA cable to the eSATA port at the back of the

enclosure. The other end of the cable connects to an eSATA host controller.

Step 2: Plug into the power jack located at the back of the enclosure, the power

adapter. This power connection provides power to the ruby enclosure.

Step 3: Set the switch to EXT position. The power LED will light up to indicate

power is provided to the drive.

eSATA cable

Model: RCHDSAEU

For External Application:

Power adapter

Step 1: Connect the eSATA cable to the eSATA port at the back of the

enclosure. The other end of the cable connects to the eSATA port on the USB2.0

to eSATA adapter. Plug the adapter to a USB port on your system.

Red LED showing

adapter access

eSATA cable from

Ruby enclosure

Step 2: Plug into the power jack located at the back of the enclosure, the power

adapter. This power connection provides power to the ruby enclosure.

Step 3: Set the switch to EXT position. The power LED will light up to indicate

power is provided to the drive.

eSATA cable

USB Port

Green LED showing

adapter connectivity