Addonics Technologies RCHDSAES Manual do utilizador - Página 3
Procurar online ou descarregar pdf Manual do utilizador para Armazenamento Addonics Technologies RCHDSAES. Addonics Technologies RCHDSAES 4 páginas. Ruby combo hard drive
Imprimir páginaModel: RCHDSAES
*Note: The Ruby combo hard drive with the eSATA interface must be connected
to a SATA controller with hot swap capability in order to add and remove drive
cartridge without rebooting. Please consult your motherboard or the add-in card
manufacturer to determine hot swap support on your SATA controller. All of the
Addonics SATA Host Controllers are hot swap capable.
For External Application:
Power adapter
Step 1: Connect the eSATA cable to the eSATA port at the back of the
enclosure. The other end of the cable connects to an eSATA host controller.
Step 2: Plug into the power jack located at the back of the enclosure, the power
adapter. This power connection provides power to the ruby enclosure.
Step 3: Set the switch to EXT position. The power LED will light up to indicate
power is provided to the drive.
eSATA cable
Model: RCHDSAEU
For External Application:
Power adapter
Step 1: Connect the eSATA cable to the eSATA port at the back of the
enclosure. The other end of the cable connects to the eSATA port on the USB2.0
to eSATA adapter. Plug the adapter to a USB port on your system.
Red LED showing
adapter access
eSATA cable from
Ruby enclosure
Step 2: Plug into the power jack located at the back of the enclosure, the power
adapter. This power connection provides power to the ruby enclosure.
Step 3: Set the switch to EXT position. The power LED will light up to indicate
power is provided to the drive.
eSATA cable
USB Port
Green LED showing
adapter connectivity