Dantherm CDP 50 Instructies Servicekit - Pagina 5

Blader online of download pdf Instructies Servicekit voor {categorie_naam} Dantherm CDP 50. Dantherm CDP 50 12 pagina's. Replacing rh/t sensor
Ook voor Dantherm CDP 50: Handleiding voor snelle installatie (14 pagina's), Snelle installatie (20 pagina's), Handmatig (6 pagina's)

Pagina afdrukken

11.

Mount the humidity sensor on the bracket with

PPI filter and two cable binders as shown.

12.

Run a full test of the unit with the latest software version.

(Instructions on how to download and install latest software version is found on next page)

13.

Remount the front and make sure the sensor is

visible through the grille.

Instructions

Note: the white surface and hole in the sensor must be

facing front.