Abus PLBW10000 Handmatig - Pagina 14
Blader online of download pdf Handmatig voor {categorie_naam} Abus PLBW10000. Abus PLBW10000 18 pagina's. Dual motion detector
Ook voor Abus PLBW10000: Beknopte handleiding (2 pagina's), Beknopte handleiding (4 pagina's)
Pagina afdrukken
3. Advanced Z-Wave Parameters
3.1. Association Groups
Z-Wave devices can control other devices directly. This direct control is called association in Z-Wave.
For this purpose, the device ID of the device to be controlled must be stored in the controlling devices.
This takes place in so-called association groups. An association group is always linked to an event in
the controlling device (keystroke or triggering of a sensor). When this event occurs, a control command
- usually a BASIC SET - is sent to all devices stored in an association group.
The device supports two association groups:
Group-
Maximum
Number
Devices
Group 1
1
Group 2
4
Group 1 (Association Z-Wave Controller)
The Lifeline Association is automatically established between the Z-Wave controller and the
device during inclusion and defines what information is exchanged between the Z-Wave
controller and the device.
Group 2 (direct association to terminals)
When the motion alarm is triggered, it sends a BASIC SET On / Off command to the nodes of
group 2
3.2. WakeUp Time
The time between the WakeUp Notification Commands can be set in the Wakeup Command Class
within the following values:
Minimum wake-up interval
Maximum wake-up interval
Default value Wake-up interval
Interval steps
Group name
Lifeline
PIR control
Description
Profile
General
Device Reset Locally Notification
Sensor Multilevel Report
Notification
14
English
Command class
Notification report
Battery report
Basic set
Value
600s
86400s (1 day)
21600s (6 hours)
600s