Duratuf Garrison PL36 Montagehandleiding - Pagina 11
Blader online of download pdf Montagehandleiding voor {categorie_naam} Duratuf Garrison PL36. Duratuf Garrison PL36 16 pagina's. Base size: 1.020m x 2.020m
Pagina afdrukken
ASSEMBLE FRONT PANEL
SELECT:
1 x 1.020 Top Plate (Red)
1 x 1.020 Bottom Plate (Green)
2 x 1.980 Corner Door Jamb Flashing
4 x 30mm Galv Clouts
9 x Rivets
STEP 1:
• Lay out 1 x Top Plate and 1 x Bottom Plate on a flat
surface as shown
STEP 2:
• Using 2 x 30mm clouts, nail the Door Jamb Flashing flush with
the top of the Top Plate at the correct measurement as shown
in plan view. Pre drill holes using a 3.5mm drill bit.
• Check the distance between the top and bottom plates then use
a further 2 x 30mm clouts to nail the Door Jamb Flashings to
the bottom Plate. Pre drill holes.
NOTE:
Door can be hinged on either side.
STEP 3:
• Place the door on the panel (In open position, approx
20mm below top of top plate). Using two rivets, rivet the top
and bottom hinges to the Door Jamb Flashing, ensuring
door closes properly.
• Fit remaining rivets.
IMPORTANT—IF YOU CHOOSE TO RAISE YOUR TIMBER
BASE PLATE –READ THE FOLLOWING;
For sheds with Raised Base Plate option only (see page 6), deduct
30mm from measurement shown between Top and Bottom Plates on
all wall panels, so cladding protrudes 20mm below bottom plate
1948mm
15mm
10
TOP PLATE
1948mm
BOTTOM PLATE
Plan View
15mm
TOP PLATE
DOOR OPENING
960mm
TOP
PLATE
NAIL
x3
x3
x3
.
DOOR
JAMB