Duratuf KIWI MK2A Montagehandleiding - Pagina 13

Blader online of download pdf Montagehandleiding voor {categorie_naam} Duratuf KIWI MK2A. Duratuf KIWI MK2A 16 pagina's.
Ook voor Duratuf KIWI MK2A: Montagehandleiding (18 pagina's)

Pagina afdrukken

Step 5: Bottom Door Guide: Slide Door to corner. Hang

Door Guide (108) on bottom of the Door. Make it

flush with Corner Flashing. Lift up approximately

3mm so that the Door will Slide freely. Pre-drill

hole and nail in place using a 50mm nail. Slide to

centre. Ensuring Door slides freely, pre-drill hole

and nail Door Guide in place. Check Door is not

binding in the middle then pre-drill holes into

each Rib at similar spacing into Door Step Flash-

ing. Nail off using 50mm nails.

Note:

For sheds with Raised Base Plate option the

Door Step Flashing will protrude down past the

Bottom Plate. Attach Door Guide with rivets.

Step 1: Position Barge Flashing (A102) on gable

ends. Position a Spouting (B103) and rivet

to the Barge Flashing at each end. Repeat

with other Spouting.

MK2A DOOR

MK2A BARGE & SPOUTING

DOOR

GUIDE

Step 2: Centralise Barge Flashing on gable end

and rivet in place, one rivet into every

second Rib. Fit two rivets through top of

Barge into Rib. Repeat with other Barge

Flashing. Check Spoutings are straight,

then rivet to Roof one rivet every second

Rib.

CLADDING

BOTTOM

PLATE

DOOR