Duratuf KIWI MK2A Montagehandleiding - Pagina 14

Blader online of download pdf Montagehandleiding voor {categorie_naam} Duratuf KIWI MK2A. Duratuf KIWI MK2A 16 pagina's.
Ook voor Duratuf KIWI MK2A: Montagehandleiding (18 pagina's)

Pagina afdrukken

Step 1: Place shed in final position. Check the di-

agonal measurements are the same and

the shed is level before fitting Floor. It is

recommended that the shed is anchored

down with either a Duratuf Bolt Down Kit or

Duratuf Peg Down Kit depending on what

the shed is sited on.

Step 2:

Lay a Floor Board on top of Bottom Plates and

Joist and push up against end wall. Mark out

where Studs are. Cut checkouts with Electric Jig-

saw so Floor Board will fit around Studs.

Step 3: Re-position Floor Board. Lay out remaining

Floor Boards checking around Studs as

you go. The last Floor Board may have to

be cut to size.

Step 4: Nail in each Floor Board, two 50mm nails in

each end and two into Joists. Measure and

cut Floor Flashing (110) to fit in between

Door Jamb Flashings and nail in place using

50mm Clouts.

MK2A FLOOR