Daspi JENNY Gebruiksaanwijzing - Pagina 6

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Daspi JENNY. Daspi JENNY 12 pagina's. Gear motor for balanced overhead door

Pagina afdrukken

eneral safety rules

Our compliments for your excellent choice. Your new electromechanical

barrier has been produced according to a high quality and strict

reliability, that's why it will assure you long-lasting performance. This

booklet will offer you all the pieces of information you may need to

install your barrier and to safe guard your safety.

All our products have been made in conformity with the regulations

in force. We recommend using original part only, during the

installation and the upkeep. However, the caution is unquestionably

indispensable and nothing is better than preventing accidents.

Mportant

Any installation or repair, or adjustment of the working machinery

by unqualified people is strictly prohibited unless all the necessary

precautions: power supply disconnected (included possible batteries).

All moving mechanism must be provided with suitable protections.

DASPI is not responsible for any possible damages or injuries to

people, object or animals, caused by any use not provided for this

booklet and/or any unauthorized modification of the product. Keep

scrupulously this booklet enclosing it with technical brochure of

installation in a suitable place well-know by all the interested people.

You have to operate the elimination of the packing material (cardboard,

plastic, polystyrene, etc.) in conformity with the regulations in force,

remembering that for a child a plastic envelope could be extremely

dangerous. You have to teach the people employed in using the

automation about the control and security systems of the installation.

Don't install this product in explosive places.

ecuritY

ecHanisM

distance

in MouveMent

ProDuCt

The gear motor JENNY has been planned and built in order

to opening overhead garage door with a maximum size of

10 sqm. DASPI is not responsible for any anomalous and

different use of the gear motor JENNY.

IMPORTANT: The gear motor JENNY is not provided with

mechanical clutch and must be installed with its DASPI

control panel or with a control panel provided with electronic

clutch.

use oF tHe autoMatIon

As the automation can be controlled from the distance through

a remote control, you must always check the full efficiency of

all the safety devices. We recommend inspecting periodically

(every 6 Month) by qualified people the adjustment of the

electronic clutch. If you need to calibrate the protection

consult the paragraph "Adjustment of the electronical clutch"

in the instruction booklet of the electronic central unit.

PrelIMInarY CHeCks

• Read carefully the instruction.

• Check that the product has not been damage during the

transport.

• Check that the door structure is strong and correctly

balanced, and that during its movement there aren't friction

points

• Check that the electrical installation is in accordance with

the characteristic required by the gear motor.

• Check that there is a suitable ground safety system and that

the metallic parts of the installation are connected.

englIsH

o not install tHe

lectric sHock

autoMation in place Full

oF explosive Moistures

pkeep

For any kind of upkeep, you have always to cut off the power

supply.

For a correct upkeep of the installation where you have installed the

gear motor JENNY follow carefully these instructions:

Clean periodically the photocells.

Checking by qualified people the electronic clutch (see the paragraph

"Installation of the electronic central unit").

Lubrificate periodically the guide and the wheel of the gate.

In case of malfunction going and seeing qualified people.

eMolition

You have to operate the elimination of the materials in conformity

with the regulations in force. All material must be divided by type

(copper, aluminium, plastic, electrical central unit). However there are

not material considered dangerous for the handler.

isMantling

In order to dismantle or to move away the automation, follow these

instructions:

Cut off the power supply and disconnect the electrical installation.

Dismantle the control console and all the other components of the

installation.

If you have noticed that some components have been damaged, you

have to replace them.

tHe gloves

• Check that the manual manoeuvre always is easily

practicable.

• Remember that the automation makes easy the use of the

door but don't resolve the problems due to a defective

installation or to a faulty of upkeep.

luBrIFICatIon

The gear motor JENNY is provided with permanent

lubrification

InstallatIon

The automation with a central assembling of one gear motor

JENNY is recommended for overhead doors of size inferior

or equal to 10 sum (see the instructions "JENNY – Central

operator").

For higher dimensions or for overhead doors with a pedestrian

door we recommend to use two lateral operators JENNY (see

the instructions "JENNY – lateral operators").

WarnIng

In the last situation you have to install in the overhead door

a safety micro switch in order to avoid the functioning of the

operator when the pedestrian door is open.

Do not install only one operator JENNY in lateral position, this

could be compromise the stability of overhead door.

se glasses

eep tHe protection

For Welding

carter