Data Signs PTL Remote Bedienings- en onderhoudshandleiding - Pagina 2
Blader online of download pdf Bedienings- en onderhoudshandleiding voor {categorie_naam} Data Signs PTL Remote. Data Signs PTL Remote 19 pagina's. Portable traffic lights
Pagina afdrukkenInstallation - Setting Up for Operation
2
Complete the setup
procedure as per the
steps below.
Suitable location:
Ensure that a level
surface is chosen for
setup.
Push with your feet on
the levers to allow the
stabilizer feet to fall
downwards.
Take care when the
feet fall downwards!
Do this for all sides as
shown.
D A T A S I G N S A U S T R A L I A P T Y L T D
Once all feet are down,
pull the center post
upwards to lock each
foot into place.
If high winds are
expected, place 20Kg
sand bags on each leg.
Once the stabilizers are
fixed into position, place
the Control Box onto
the post.
Align the notches in
the control box over the
metal bracket and lower
onto it.
Remove the light from
the carry bag.
Place it on the post
until the pin locks it into
place.