4IPNET EAP210 Snelle installatiehandleiding - Pagina 13

Blader online of download pdf Snelle installatiehandleiding voor {categorie_naam} 4IPNET EAP210. 4IPNET EAP210 15 pagina's. Enterprise access point
Ook voor 4IPNET EAP210: Gebruikershandleiding (20 pagina's)

Pagina afdrukken
4IPNET EAP210 Snelle installatiehandleiding
Step 3. Configure VAP (Virtual Access Point) Profile Settings
 The EAP210 supports up to 16 virtual APs (VAPs).
 Configure VAP profile settings：
(a) Select the VAP Configuration tab to configure the settings of the desired VAP.
(b) Choose a specific RF card to set up
(c) Enable a selected VAP from the drop-down menu of Profile Name and configure related
settings below.
Check "CAPWAP Tunnel Interface" if you would like data of this VAP to go through the
(d)
Controller when the Access Point is managed by CAPWAP.
 Check VAP status：
After finishing VAP configuration, the status of the enabled Virtual APs shall be reflected on the VAP
Overview page – at Wireless > VAP Overview.
Copyright © 4IPNET, INC. All rights reserved.
VAP Configuration Page (RF Card A : VAP-1 shown)
EAP210 Enterprise Access Point
9
Quick Installation Guide
ENGLISH