Elsema MD2010 Handmatig - Pagina 4

Blader online of download pdf Handmatig voor {categorie_naam} Elsema MD2010. Elsema MD2010 6 pagina's. Loop detector

Feature

Permanent presence or limited presence mode (When presence mode selected. See dip-switch 8)

This setting determines how long the relay remains active when a vehicle is stopped within the sensing loop

Limited presence mode

Permanent presence mode

Relay response 1

Relay response 2

Filter "ON"

Dip Switch settings

(Dip switch 5)

area.

Dip switch 5 "OFF"

Dip switch 5 "ON"

Relay Response (Dip switch 6)

Dip switch 6 "OFF"

Dip switch 6 "ON"

Filter (Dip switch 7)

Dip switch 7 "ON

Description

With limited presence mode, the detector will only

activate the relay for 30 min.

If the vehicle has not moved out of the loop area after

25 min, the buzzer will sound to alert the user that the

relay will deactivate after another 5 min. Moving the

vehicle across the sensing loop area again, will re-

activate the detector for 30 min.

The relay will remain active for as long as a vehicle is

detected within the sensing loop area. When the vehicle

clears the sensing loop area, the relay will deactivate.

Relay activates immediately when the vehicle is

detected in the sensing loop area.

Relay activates immediately after the vehicle leaves the

sensing loop area.

This setting provides a 2 sec delay between detection

and relay activation. This option is used to prevent

false activations when small or fast moving objects

pass through the loop area.

This option can be used where an electric fence nearby

is the cause of false activations.

If the object does not remain in the area for 2 sec the

detector will not activate the relay.

ELSEMA

MD2010