Elsner P03/3 Technische specificaties en installatie-instructies - Pagina 10
Blader online of download pdf Technische specificaties en installatie-instructies voor {categorie_naam} Elsner P03/3. Elsner P03/3 11 pagina's.
Pagina afdrukken
away or bend the cable connection between the blank and the rain sensor when con-
necting the weather station.
Remove all existing protection labels after installation.
The correct wind value may only be supplied about 30 seconds after the supply voltage
has been connected.
2.5. Maintenance of the weather station
WARNING!
Risk of injury caused by components moved automatically!
The automatic control can start system components and place people in
danger.
•
Always isolate the device from the mains for servicing and cleaning.
The device must regularly be checked for dirt twice a year and cleaned if necessary. In
case of severe dirt, the sensor may not work properly anymore.
ATTENTION
The device can be damaged if water penetrates the housing.
•
Do not clean with high pressure cleaners or steam jets.
P03/3 Weather Station • Status: 09.06.2016 • Technical changes reserved. Errors reserved.
10
Installation and commissioning