Cayken KCY-520WEQ Gebruiksaanwijzing - Pagina 10

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Cayken KCY-520WEQ. Cayken KCY-520WEQ 16 pagina's.

MAINTENANCE AND INSPECTION

Note:Do not plug in before checking the machine.

The accumulative working hours of the machine can not exceed 24hours.

Then it must be thoroughly cleaned up and maintained.You should especially

guarantee the lubrication and flexibility of the lifting screw and the lifting screw

and the lifter of the host machine.(They can not have any slurry and sundries,

which is good for operation.On the contrary,it will damage the machine.)

1.Check the blade

Using attrited blade will reduce the cutting efficiency and make the motor overwork.

The blade needs to be changed timely.

2.Check the chain wheel

Check whether the 16chain wheels under the foundation are stuck or fail to work.

The space between the chain wheel and the track way is no more than 0.2mm,or

else you should loosen the screw caps for fastening the chain wheels and adjust

the hexagonal tightening screws at both sides of the foundation accordingly.

3.Check the chain wheel

Check monthly the depth of parallelism between the moving direction of the blade

and the track way.If the distance between the blade and the track can not be more

than 1mm,or else the blade maybe stuck by the concrete when cutting,thus decre-

asing the cutting efficiency.If they are not parallel,loosen the 4 set screw of two sp-

eed box on the middle base with hexagon spanner of less than6mm and adjust de-

pth of parallelism of the blade.

4.Check the carbon brush

The motor contains dissipative carbon brush,If the carbon brush is seriously worn,

it will wear the motor. When the carbon brush is frayed to only 6mm,it needs to

change a new carbon brush.Keep the brush clean, so that it can be easily put into

the carbon brush box.

Note: Keep changing the carbon brush from the original manufacturer. Nip tightly

the power line when changing the carbon brush.

5.The motor 's protection

The motor is the heart of the machine. Be careful.Do not let oil or water into the

motor.

Notes: If dust or things come into the motor.the motor may be damaged.

Make the motor run no-load to eject the dust after each use.

6.Check the screws on the machine

Check whether the screws on the machine are loosed.If they are,fasten them.It is

very dangerous to use machine with loosed screws.