Datalogic S70 Handmatig

Blader online of download pdf Handmatig voor {categorie_naam} Datalogic S70. Datalogic S70 18 pagina's. Advanced sensor with dual digital displays for use with plastic and glass fiber optic assemblies
Ook voor Datalogic S70: Snelstarthandleiding (10 pagina's)

Datalogic S70 Handmatig
For complete technical information about this product, including dimensions, accessories, and specifications, see www.datalogic.com.
WARNING: Not to be used for personnel protection
Never use this device as a sensing device for personnel protection.
Doing so could lead to serious injury or death. This device does not include the self-checking redundant
circuitry necessary to allow its use in personnel safety applications.
A sensor failure or malfunction can cause either an energized or de-energized sensor output condition.
S70-2-E1-N
S70-2-E1-P
S70-5-E1-N
S70-5-E1-P
S70-5-E1-PZ
S70-5-E2-N
S70-5-E2-P
CONNECTIONS
NPN Version
LOAD
Load
IO-Link Version
(C/Q)
Load
(Q)
Load
NOTE: Open lead wires must be connected to a terminal block.
1
A model with a QD connector requires a mating cordset.
S70 Series
Advanced sensor with dual digital displays
for use with plastic and glass fiber optic assemblies
Figure 1
Outputs
Single NPN
Single PNP
Single NPN
Single PNP
Dual outputs, 1 push-pull IO-Link and 1 PNP
(complementary outputs)
Single NPN
Single PNP
10-30 VDC
Remote
Programming (N.O.)
18-30 VDC
1
2
3
4
5
6
7
2 m cable, 4-wire
Integral M8 Pico QD connector, 4-pin
Integral M8 Pico QD connector, 4-pin
PNP Version
10-30 VDC
LOAD
Load
Remote
Programming (N.O.)
1
Output LED
LO/DO Switch
RUN/PRG/ADJ Mode Switch
Lever Action Fiber Clamp
Red Signal Level
Green Threshold
+/SET/- Navigation key
1
Connector
Key
1 = Brown
2 = White
3 = Blue
4 = Black
Pico
4
2
1
3