Dustie DAC500 Plus Handmatig - Pagina 8

Blader online of download pdf Handmatig voor {categorie_naam} Dustie DAC500 Plus. Dustie DAC500 Plus 16 pagina's.

Pagina afdrukken

Common problems

Common problem

Why is there no air coming out of

the air cleaner?

Why does the filter need to be

cleaned?

How often should the HEPA be

replaced?

How often should the Molecular

Filter be replaced?

Why will the airflow be reduced

after the air cleaner is used for a

period of time?

If you need services or wan to purchase filters and other supplies, please call our customer service line 4009-21-3058.

Notes: The CCM of particular matters is obtained through the test with the specific smoke particles as the target pollutants in the

laboratory conditions and identified according to the specified evaluation interval.

Notes: The CCM of gaseous pollutants is obtained through the test with single gaseous pollutants as the target pollutants in the

laboratory conditions and identified according to the specified evaluation interval.

Troubleshooting

Inspect whether the wire plug has been properly

inserted or not.

Inspect whether plastic bags of the filter have been

removed or not.

Inspect whether the filter has been properly assembled

or not.

Inspect whether the filter covers have been properly

assembled or not.

Check whether the outlet in the upper part of the air

cleaner is blocked. If it is blocked, it will affect the

operation of the air cleaner.

Inspect whether operation is set as the fixed-time mode

and the set time is up.

The filter is the core of the product, so regular cleaning

can not only improve its filtering performance but also

prolong its life. The DAC500 series air cleaners can be

externally cleaned after it is used for a period of time.

After cleaning the filter according to the instructions, put

it back into the air cleaner. Plug in the air cleaner. After

the cleaning of the Pre Filter, press and hold the

indicator light for 5 seconds to reset the timer.

It depends on the service conditions. If the product is

used in a place with poor air quality or in a newly

decorated house, it is suggested to clean or replace the

filter more frequently. After cleaning the filter according

to the instructions, put it back into the air cleaner. Plug

in the air cleaner. Press and hold the corresponding

filter (reset botton) for 5 seconds to reset the timer.

The Molecular Filter should be replaced according to the

use environment. If the Molecular Filter needs to be

replaced in advance due to the sorptive saturation,

operate according to the instructions.

Make sure the air inlet and outlet are not plugged.

Remove all the plastic bags from the filters. Check the

condition of the filter and clean the filter if necessary. If

the filter is used for a period of time, consider replacing

it. Make sure the air inlet grille is at least 30 to 90

centimeters away from the walls.