CBT Supply flipIT RIMLESS Montagehandleiding - Pagina 5

Blader online of download pdf Montagehandleiding voor {categorie_naam} CBT Supply flipIT RIMLESS. CBT Supply flipIT RIMLESS 12 pagina's. Convertible computer workstation

Pagina afdrukken

Capture the pivot in the simple arm nylon

bushing. use the 7/16" open end wrench

and 5/32" hex key to tighten the pivot. This

operation is setting the depth of the flipIT lid

flush with the top surface. It is using the work

surface as a reference.

This adjustment may have to be refined after

the monitor is installed. note that this is the

pivot that will be loosened and re-tightened

to complete that adjustment using a straight

edge as a reference on the top surface.

3. Install post arm

orient the long bracket with the curve to

the keyboard and the L going away from the

cutout. Install fully tightened with four 1/2"

wood screws.

FIK19R Rimless flipIT ® by SMaRTdesks®

Insert the post for the

gas spring into the

middle position of

the front slot of the

long bracket.

Fully tighten using

7/16" open end wrench

and adjustable

crescent wrench.

www.smartdesks.com

800-770-7042