CBT Supply flipIT RIMLESS Инструкция по сборке Руководство - Страница 5

Просмотреть онлайн или скачать pdf Инструкция по сборке Руководство для Настольный компьютер CBT Supply flipIT RIMLESS. CBT Supply flipIT RIMLESS 12 страниц. Convertible computer workstation

Печатать страницу

Capture the pivot in the simple arm nylon

bushing. use the 7/16" open end wrench

and 5/32" hex key to tighten the pivot. This

operation is setting the depth of the flipIT lid

flush with the top surface. It is using the work

surface as a reference.

This adjustment may have to be refined after

the monitor is installed. note that this is the

pivot that will be loosened and re-tightened

to complete that adjustment using a straight

edge as a reference on the top surface.

3. Install post arm

orient the long bracket with the curve to

the keyboard and the L going away from the

cutout. Install fully tightened with four 1/2"

wood screws.

FIK19R Rimless flipIT ® by SMaRTdesks®

Insert the post for the

gas spring into the

middle position of

the front slot of the

long bracket.

Fully tighten using

7/16" open end wrench

and adjustable

crescent wrench.

www.smartdesks.com

800-770-7042