4M Spy Science Gebruikershandleiding

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} 4M Spy Science. 4M Spy Science 2 pagina's. Intruder alarm

CHOKING HAZARD
I N T R U D E R A L A R M
Not for Children under 3
A. SAFETY MESSAGES
1. Please read through this instructions before you start.
2. This kit is intended for age 8 and up.
3. Adults assistance and supervision required.
4. This kit contains small parts which may cause suffocation if misused.
5. Metal connection plate and wires may contain sharp points, adult assistance required in
assembling and bending.
6. Never touch the contacts inside the battery case to prevent possible short circuit.
B. USE OF BATTERY
1. Requires two "AA" batteries (Not included). We recommend alkaline batteries.
2. For optimum operation, always use fresh alkaline batteries.
3. Insert batteries according to the correct polarities.
4. Make sure that the supply terminals are not short circuited.
5. Do not leave batteries in the toy if it is not in use.
6. Remove empty batteries from the toy.
7. Do not recharge non-rechargeable batteries.
8. Rechargeable batteries should be removed from the toy before being charged (if removable).
9. Rechargeable batteries should only be charged under adult's supervision.
10. Do not mix old and new batteries.
11. Do not mix alkaline, standard (Carbon-Zinc) or rechargeable (Nickel-Cadmium) batteries.
12. Only use batteries of the same or equivalent type.
13. The toy should not be connected to more than the recommended number of power supplies.
C. CONTENTS
C2.
BATTERY HOLDER
C1.
PLASTIC INTRUDER ALARM CASE SET
WITH SWITCH AND
WITH COVER AND BASE PLATFORM
WIRES INSTALLED
C10.
C6.
CONNECTION
STRING, DOUBLE ADHESIVE
C8.
WALL MOUNT
PLATE (WITH METAL
TAPES AND DOOR PLATE
PLATES INSTALLED)
C9.
TRIGGER
C7.
TRIGGER PLATE
PLATE HOLDER
D. INSTRUCTIONS: ASSEMBLING THE ALARM CASE
WARNING
Small parts.
C3
3
Install the buzzer (C3).
C3.
BUZZER WITH
WIRES INSTALLED
C4.
METAL PEGS
C5
C5.
PLASTIC PEGS
OTHER ACCESSORIES:
4
Connect the wires from the
buzzer with that from the
connection plate. Match the
wires colours.
C6
2
Install the connection
plate (C6).
C4
5
Connect the wires from
battery holder with that
from the buzzer. Match the
wires colours.
C2
1
Install battery holder (C2).
8
Install the cover to complete the alarm case
set.
7
Install the batteries. You may
now check if all connections
are correct by switching on
the switch button. The
buzzer should produce a
buzzing sound. After the
testing, switch it off.
QUESTION AND COMMENTS
We treasure you as a customer and your satisfaction
with this product is important to us. In case you have
any comments or questions, or you find any parts of
this kit missing or defective, please do not hesitate to
contact our distributor in your country, whose address
is printed on the package. You are also welcome to
6
Connect the wires from the
contact our marketing support team at Email:
connection plate with that
[email protected], Fax (852) 25911566, Tel (852)
from the battery holder.
28936241, Web site: WWW.4M-IND.COM
Match the wires colours.