DVC 5320 Installatie-, Bedienings- en Onderhoudshandleiding - Pagina 7

Blader online of download pdf Installatie-, Bedienings- en Onderhoudshandleiding voor {categorie_naam} DVC 5320. DVC 5320 12 pagina's. Mechanical limit switch box

Pagina afdrukken
TYPE 5320
Note:
 Prior to mounting of the limit switch box the item must be checked for any
damage
 Damaged parts must be replaced by original spare parts
Mounting is most easily done with the actuator shaft pointing vertically upwards. But mounting is
also possible in any other position.
The limit switch box may be mounted in any position.
It is mandatory that the limit switch box is firmly secured t a sturdy mounting bracket High tensile
bolts or studs with spring locking washers must be used.
The limit switch box output shaft must be in line with the actuator shaft to avoid side-loading the
shaft. To avoid any backlash no flexibility in the mounting bracket or mounting should be allowed.
Caution: Make sure to cut off the electrical power before working on the limit switch box for
assembly, mounting etc.

4.3 Fitting the mounting bracket

Two types of standard DVC mounting brackets are available
NAMUR VDE/VDI 3845 size 30x80
NAMUR VDE/VDI 3845 size 30x130
The mounting bracket is fixed onto the top of the actuator by use of correctly sized high tensile
bolts and spring washers.
INSTALLATION, OPERATION AND MAINTENANCE MANUAL
Fixed mounting bracket on top of actuator
I O M . U K . D V C . 5 3 2 0 . 3 0 0 6 1 5 - R E V . B
PAGE 7