DVC 5320 Kurulum, Kullanım ve Bakım Kılavuzu - Sayfa 7

Anahtar DVC 5320 için çevrimiçi göz atın veya pdf Kurulum, Kullanım ve Bakım Kılavuzu indirin. DVC 5320 12 sayfaları. Mechanical limit switch box

TYPE 5320

Note:

 Prior to mounting of the limit switch box the item must be checked for any

damage

 Damaged parts must be replaced by original spare parts

Mounting is most easily done with the actuator shaft pointing vertically upwards. But mounting is

also possible in any other position.

The limit switch box may be mounted in any position.

It is mandatory that the limit switch box is firmly secured t a sturdy mounting bracket High tensile

bolts or studs with spring locking washers must be used.

The limit switch box output shaft must be in line with the actuator shaft to avoid side-loading the

shaft. To avoid any backlash no flexibility in the mounting bracket or mounting should be allowed.

Caution: Make sure to cut off the electrical power before working on the limit switch box for

assembly, mounting etc.

4.3 Fitting the mounting bracket

Two types of standard DVC mounting brackets are available



NAMUR VDE/VDI 3845 size 30x80



NAMUR VDE/VDI 3845 size 30x130

The mounting bracket is fixed onto the top of the actuator by use of correctly sized high tensile

bolts and spring washers.

INSTALLATION, OPERATION AND MAINTENANCE MANUAL

Fixed mounting bracket on top of actuator

I O M . U K . D V C . 5 3 2 0 . 3 0 0 6 1 5 - R E V . B

PAGE 7