DVS EC PREMIUM CONNECT Gebruikershandleiding - Pagina 3

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} DVS EC PREMIUM CONNECT. DVS EC PREMIUM CONNECT 6 pagina's.

Pagina afdrukken

How to adjust or check on the operation

of your DVS®

Note: Most Customers find they don't need to make any

adjustments to their system. The system costs very little

to run and is programmed to give optimal ventilation

performance for your home whilst being as unobtrusive as

possible. However, if you need to make adjustments or to

check on what the system is doing, the instructions below are

a handy guide for you.

Turning the system ON or OFF

Touch the settings icon

at the top right of the home

screen then –

. The system is now OFF. To turn the

POWER OFF

system ON – touch the screen. The system will re-start.

Set Temperature

Touch

arrows to adjust. This is the temperature the

system will try to achieve.

Set and Forget or Customise: You can, for example set

this to 21

C. A typically efficient setting to provide good

'year-round' performance, or you can adjust seasonally if you

wish. In Summer, if you select a Set Temperature of 18

example, the house will reach this temperature quickly. The

system will turn off, preventing warm air being introduced.

The system starts again when the air supply is cooler than

C. In Winter, you could select a higher Set Temperature of

C for example. When or if there is heat available from the

air supply, the system will be in Heat Recovery mode and will

try to reach 23

C in the home more quickly.

Note: The system will continue to operate even if the roof

space is cooler than the house. The system will automatically

reduce the air supply rate to the minimum normally needed

for a drier healthier home.

Help icon

Where applicable, the settings adjustment screens will

also contain a

. If you touch that you will be given an

explanation of the nature of the settings and if applicable the

effect of adjusting them.

For further assistance please call DVS

Fan Settings

Adjusting your fan settings increases or decreases the

level of ventilation or how aggressive your system is. Your

system has been programmed for your home. The DVS® will

typically perform well without the need to make fan settings

adjustments. However, you are of course able to make

adjustments.

Fan Boost

Touch settings icon

– Scroll up to set the time you wish to have fan

FAN BOOST

boost –

OK > EXIT > EXIT

The system will be in fan boost mode and will return to

normal after the selected time.

Fan Speed programming adjustment

Touch settings icon

– Slide the Fan Speed bar up (to the right) or

FAN CONTROL

down (to the left) –

This setting changes the programmed minimum condensation

control fan speed for your system. Heat recovery and heat

C for

retention fan settings are indexed to this speed and so will

increase or decrease the fan speed relative to this setting.

Heat Recovery settings

Touch settings icon

– Slide the Heat Recovery bar up (to the right)

FAN CONTROL

or down (to the left) –

This setting adjusts how aggressively the system reacts

when the air supply being introduced is warmer than the air

temperature (measured at the control panel) in the home.

Heat Retention settings

If you experience cooling from the system, this feature can

help. We suggest making small changes, then assessing the

need to increase it.

Touch settings icon

– Slide the Heat Retention bar up (to the right)

FAN CONTROL

or down (to the left) –

This setting adjusts how passively the system behaves

when the air supply being introduced is colder than the air

temperature (measured at the control panel) in the home.

Note: if you have Heat Retention activated the system will

reduce air supply to below the programmed minimum. This

can affect the performance of the system and so you may

see more condensation or dampness on cooler days than the

DVS® would normally allow.

on 0800 387 387

then –

SETTINGS > FAN SETTINGS >

then –

SETTINGS > FAN SETTINGS >

OK > EXIT > EXIT

then –

SETTINGS > FAN SETTINGS >

OK > EXIT > EXIT

then –

SETTINGS > FAN SETTINGS >

OK > EXIT > EXIT