austriamicrosystems AS5163 Bedieningshandleiding - Pagina 3
Blader online of download pdf Bedieningshandleiding voor {categorie_naam} austriamicrosystems AS5163. austriamicrosystems AS5163 6 pagina's. 14 bit programmable magnetic angle position encoder
Ook voor austriamicrosystems AS5163: Bedieningshandleiding (6 pagina's)
Pagina afdrukken2.4
Encoder selection switch
The switch S2 selects the encoder which communicates with the microcontroller.
1.
Right position (default):
2.
Left Position:
The signals of the interface (OUT) and the power supply (5V, GND) of an external device can be
connected directly to J6. In this configuration, this data is displayed on the LCD.
An AS5163 can be attached to J6 and evaluated. See figure 3.
Revision 1.0, June 2009
Onboard AS5163
External AS5163 connected on J6
Demoboard switched to external
encoder mode
Figure 3: external AS5163 connection to the demoboard
www.austriamicrosystems.com
Page 3 of 6