austriamicrosystems AS5163 운영 매뉴얼 - 페이지 3
{카테고리_이름} austriamicrosystems AS5163에 대한 운영 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. austriamicrosystems AS5163 6 페이지. 14 bit programmable magnetic angle position encoder
austriamicrosystems AS5163에 대해서도 마찬가지입니다: 운영 매뉴얼 (6 페이지)
페이지 인쇄2.4
Encoder selection switch
The switch S2 selects the encoder which communicates with the microcontroller.
1.
Right position (default):
2.
Left Position:
The signals of the interface (OUT) and the power supply (5V, GND) of an external device can be
connected directly to J6. In this configuration, this data is displayed on the LCD.
An AS5163 can be attached to J6 and evaluated. See figure 3.
Revision 1.0, June 2009
Onboard AS5163
External AS5163 connected on J6
Demoboard switched to external
encoder mode
Figure 3: external AS5163 connection to the demoboard
www.austriamicrosystems.com
Page 3 of 6