Bresser Meteo THBM Colour Gebruiksaanwijzing - Pagina 10

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Bresser Meteo THBM Colour. Bresser Meteo THBM Colour 20 pagina's.

6. Finally press the TIME SET button to save the settings and exit the setting mode.

11 Alarm setting

1. Press and hold ALARM button for approx. 3 seconds to enter the alarm time setting mode.

2. Digits to be set are flashing.

3. Press +/CHANNEL or -/MEM button to change the value.

4. Press ALARM button to confirm and continue to the next setting.

5. Settings order: Hours > Minutes

6. Finally press the ALARM button to save the settings and exit the setting mode. Alarm will be activ-

ated automatically. The

7. Press ALARM button in normal display mode to display the alarm time.

8. Press ALARM button during the alarm time display to disable the alarm. The

displayed.

1. When the alarm sounds, press SNOOZE button to activate the snooze function. The alarm will

sound again in 5 minutes.

2. Press ALARM button when the alarm sounds to interrupt the alarm until the alarm time will be

reached again.

3. The alarm will be turned off automatically if no button is pressed within 2 minutes.

Once the power supply is enabled, the base station will display the measurement readings. Readings

from the remote sensor will be displayed within 3 minutes after powering it on.

Read the detailed manual for more information about readings (see download information on page 2).

1. Press -/MEM button several times to display the saved values one after another.

2. Display order: Temperature maximum value (outdoor) > Temperature minimum value (outdoor) >

Humidity maximum value (outdoor) > Humidity minimum value (outdoor) > Temperature maximum

value (indoor) > Temperature minimum value (indoor) > Humidity maximum value (indoor) > Hu-

midity minimum value (indoor)

3. Press and hold -/MEM button for approx. 3 seconds to delete the value currently displayed.

HI/LO alert

trigger and the alert icon flashes as soon as a set value is reached.Supported areas and alarm types:

Area

Indoor temperature

Outdoor temperature

Indoor humidity

Outdoor humidity

HI AL = High alert / LO AL = Low alert

HI/LO alert setting

10 / 20

symbol will be displayed.

are used to alert you of certain weather conditions. Once activated, an alarm sound is

Type of alert available

HI AL / LO AL

symbol will not be