BENDIX AD-IS - Handmatig - Pagina 7
Blader online of download pdf Handmatig voor {categorie_naam} BENDIX AD-IS -. BENDIX AD-IS - 17 pagina's. Air dryer and reservoir system
Ook voor BENDIX AD-IS -: Brochure (2 pagina's), Servicegegevens (15 pagina's)
Pagina afdrukken
- 1. Air Dryer/Reservoir System Charge Cycle
- 2. Air Dryer/Reservoir System Purge Cycle
- 3. Charge Cycle
- 4. Purge Cycle
- 5. Preventive Maintenance
- 6. Operation & Leakage Tests
- 7. Pressure Protection Valve Locations
- 8. Testing
- 9. Braking System Protection & Inspection
- 10. Temporary Air Dryer/Reservoir System Bypass
- 11. Delivery Check Valve Cleaning Procedure
- 12. Cleaning and Inspection
- 13. Troubleshooting
FIGURE 6 - SPLASH SHIELD BRACKET AND COVER - (EXPLODED VIEW)
3. Do not attempt to install, remove, disassemble or
assemble a component until you have read and
thoroughly understand the recommended
procedures. Use only the proper tools and observe
all precautions pertaining to use of those tools.
4. If the work is being performed on the vehicle's air
brake system, or any auxiliary pressurized air
systems, make certain to drain the air pressure
from all reservoirs before beginning ANY work on
the vehicle. If the vehicle is equipped with an
®
AD-IS
air dryer system or a dryer reservoir
module, be sure to drain the purge reservoir.
5. Following
the
recommended procedures, deactivate the
electrical system in a manner that safely removes
all electrical power from the vehicle.
6. Never exceed manufacturer's recommended
pressures.
7. Never connect or disconnect a hose or line
containing pressure; it may whip. Never remove a
component or plug unless you are certain all
system pressure has been depleted.
8. Use only genuine Bendix
components and kits. Replacement hardware,
tubing, hose, fittings, etc. must be of equivalent
size, type and strength as original equipment and
LOCK TABS
SPLASH
SHIELD
BRACKET
vehicle
manufacturer's
®
replacement parts,
SPLASH
SHIELD
COVER
be designed specifically for such applications and
systems.
9. Components with stripped threads or damaged
parts should be replaced rather than repaired. Do
not attempt repairs requiring machining or welding
unless specifically stated and approved by the
vehicle and component manufacturer.
10. Prior to returning the vehicle to service, make
certain all components and systems are restored
to their proper operating condition.
11. For vehicles with Antilock Traction Control (ATC),
the ATC function must be disabled (ATC indicator
lamp should be ON) prior to performing any vehicle
maintenance where one or more wheels on a
drive axle are lifted off the ground and moving.
GENERAL
When rebuilding or replacing components of the air dryer
and reservoir system use only genuine Bendix parts. For
ease in servicing, the AD-IS
has been designed so that any of the following maintenance
kits can be installed without removing the air dryer and
reservoir system from the vehicle. CAUTION: Always
depressurize the air dryer and reservoir system purge
reservoir, and all other reservoirs on the vehicle to 0 p.s.i.
before servicing the air dryer and reservoir system.
®
air dryer and reservoir system
7