BENDIX AD-IS - Manuel - Sayfa 7

Nem Alıcı BENDIX AD-IS - için çevrimiçi göz atın veya pdf Manuel indirin. BENDIX AD-IS - 17 sayfaları. Air dryer and reservoir system
Ayrıca BENDIX AD-IS - için: Broşür (2 sayfalar), Hizmet Verileri (15 sayfalar)

Sayfayı Yazdır

FIGURE 6 - SPLASH SHIELD BRACKET AND COVER - (EXPLODED VIEW)

3. Do not attempt to install, remove, disassemble or

assemble a component until you have read and

thoroughly understand the recommended

procedures. Use only the proper tools and observe

all precautions pertaining to use of those tools.

4. If the work is being performed on the vehicle's air

brake system, or any auxiliary pressurized air

systems, make certain to drain the air pressure

from all reservoirs before beginning ANY work on

the vehicle. If the vehicle is equipped with an

AD-IS

air dryer system or a dryer reservoir

module, be sure to drain the purge reservoir.

5. Following

the

recommended procedures, deactivate the

electrical system in a manner that safely removes

all electrical power from the vehicle.

6. Never exceed manufacturer's recommended

pressures.

7. Never connect or disconnect a hose or line

containing pressure; it may whip. Never remove a

component or plug unless you are certain all

system pressure has been depleted.

8. Use only genuine Bendix

components and kits. Replacement hardware,

tubing, hose, fittings, etc. must be of equivalent

size, type and strength as original equipment and

LOCK TABS

SPLASH

SHIELD

BRACKET

vehicle

manufacturer's

replacement parts,

SPLASH

SHIELD

COVER

be designed specifically for such applications and

systems.

9. Components with stripped threads or damaged

parts should be replaced rather than repaired. Do

not attempt repairs requiring machining or welding

unless specifically stated and approved by the

vehicle and component manufacturer.

10. Prior to returning the vehicle to service, make

certain all components and systems are restored

to their proper operating condition.

11. For vehicles with Antilock Traction Control (ATC),

the ATC function must be disabled (ATC indicator

lamp should be ON) prior to performing any vehicle

maintenance where one or more wheels on a

drive axle are lifted off the ground and moving.

GENERAL

When rebuilding or replacing components of the air dryer

and reservoir system use only genuine Bendix parts. For

ease in servicing, the AD-IS

has been designed so that any of the following maintenance

kits can be installed without removing the air dryer and

reservoir system from the vehicle. CAUTION: Always

depressurize the air dryer and reservoir system purge

reservoir, and all other reservoirs on the vehicle to 0 p.s.i.

before servicing the air dryer and reservoir system.

air dryer and reservoir system