Gacell CT-1000 Gebruikershandleiding - Pagina 4

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Gacell CT-1000. Gacell CT-1000 9 pagina's.

to solid, the battery is fully charged.

6) Since this is a battery maintainer and you will keep it connected with

vehicle battery for a long time, do monitor monthly. Follow the battery

manufacturer's instructions for adding distilled water if applicable.

7) Following is the charger's technical specification:

AC Input

DC Output

Start Voltage

Housing Protection

Battery Type

Accessories Included

Ambient Temperature

CONNECTING TO THE BATTERY

1) Identify polarity of battery posts. The positive battery terminal is

typically marked by these letters or symbol (POS,P,+). The negative

battery terminal is typically marked by these letters or symbol (NEG,N,-).

2) Do not make any connections to the carburetor, fuel lines, or thin

metal parts.

3) Identify if you have a negative or positive grounded vehicle. This can

be done by identifying which battery post (NEG or POS) is connected to

the chassis.

4) For a negative grounded vehicle (most common): connect the RED

POSITIVE clamp / ring connector first to the positive battery terminal,

then connect the BLACK NEGATIV clamp / ring connector to the negative

battery terminal or vehicle chassis.

5) For a positive grounded vehicle (very uncommon): connect the BLACK

NEGATIV clamp / ring connector first to the negative battery terminal,

then connect the RED POSITIVE clamp / ring connector to the positive

battery terminal or vehicle chassis.

6) When disconnecting, disconnect in the reverse sequence, removing

the negative first (or positive first for positive ground systems).

220-240VAC, 50-60Hz, 0.5A

12VDC, 1A;

6VDC, 1A

> 1V

IP54

All Types of 6V and 12V Lead-acid

Batteries

Clamp Connectors, Ring Connectors

0℃ ~ +40℃