Great Circle LCE01 Gebruiksaanwijzing - Pagina 9

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Great Circle LCE01. Great Circle LCE01 18 pagina's. Chipper shredder

Adding Oil

Refer to engine manual for information on adding oil.

DANGER

1. The exhaust from this product contains carbon monoxide gas. Carbon monoxide is a colorless, orderless and

tasteless gas that can cause dizziness, nausea, unconsciousness or even brain damage and death if inhaled for

prolonged periods.

2. Operate the unit outdoors in a well ventilated location only. Keep children, pets and bystanders away.

3. Failure to follow these instructions may result in serious injury or death.

WARNING

1. Gasoline is highly flammable and must be handled with care. Never fill the tank when the engine is still hot from

recent operation.

2. Do not allow open flame, smoking or matches in the area. Avoid over-filling and wipe up any spills.

WARNING: To avoid serious personal injury from rotating cutting blades, keep

hands out of inlet while machine is running.

WARNING: Do Not Use Gasoline Containing Methanol, Gasohol Containing More

Than 10% Ethanol, Gasoline Additives Or White Gas Because Engine/fuel System

Damage Could Result.

IMPORTANT: Engine is shipped from factory without oil. You must add engine oil

before starting engine.

Adding Fuel

To add fuel:

1. Remove the fuel cap.

2. Fill the tank. Do not overfill. Leave room in the tank for fuel expansion. Refer to your engine manual for specific fuel

recommendations.

3. Install and hand tighten the fuel cap.

Starting the Engine

1. See engine manual for starting up instructions.

2. Ensure engine is running full throttle before beginning chipping operation. On some engines, the throttle may not

be adjustable.

Stopping the Engine

1. See engine manual for shut down procedure.

2. Stopping the engine is the only way to stop the rotor from turning. With engines equipped with an adjustable

throttle, move the throttle to the SLOW position and wait for engine to be running a slow RPM. Then switch to

STOP ENGINE as shown in the engine manual.

TRANSPORTING AND STORAGE

1. Always observe safe refueling and fuel handling practices when refueling the unit after transportation or storage.

2. Never store the unit (with fuel) in an enclosed poorly ventilated structure. Fuel vapors can travel to an ignition

source (such as a furnace, water heater, etc.) and cause an explosion. Fuel vapor is also toxic to humans and

animals.