Active Silicon AS-CIB-IP-001-A Snelstarthandleiding - Pagina 10
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Active Silicon AS-CIB-IP-001-A. Active Silicon AS-CIB-IP-001-A 13 pagina's. Harrier ip camera interface board
Ook voor Active Silicon AS-CIB-IP-001-A: Snelstarthandleiding (7 pagina's)
Pagina afdrukkenSetting up a WiFi connection
If your Harrier IP Camera Interface Board supports WiFi it will have a wireless module fitted and it will have a
serial number that starts with 724. The title of the Harrier IP Website will also indicate that the board has
Wireless/WiFi support.
Figure 14. Harrier IP Camera Interface Board with WiFi/wireless communications module fitted
In order to receive WiFi signals there must be at least one antenna fitted to the wireless module. The
antennae fit to the small microcoaxial MHF4 connectors (A and B) on the module.
To set up a connection to a wireless network:
•
Fit a suitable antenna to the MHF4 connector A or B (or to both).
•
Using an Ethernet cable and the Ethernet adapter, connect the Harrier IP to a network (for details
see previous sections).
•
In your web browser, enter: http://<IP Address> to access the Harrier IP Website.
•
From the menu select the 'WiFi' option to go to the WiFi Settings page
(note this page does not appear with non-wireless versions of the board).
•
Click on the 'Scan' button.
•
When the scan completes, open the drop-down list that is next to the Scan button to select a
network.
•
Enter the password for the network and select connect.
•
The Harrier IP will connect to the network and update the WiFi status on the page.
•
The network SSID and password will be saved and used next time the Harrier IP is powered up.
Only one SSID and password is stored.
The wireless network you connect to must be running a DCHP server as, by default, the Harrier IP wireless
connection is set to obtain its IP address from a DHCP server. This can be changed by accessing the
Network Settings web page, selecting the wireless interface changing the settings and then clicking on
Select. When setting fixed IP addresses please ensure that the address is correct and that you have a note
of it before changing it as it can be very difficult to locate a device at an unknown/incorrect IP address.
March 2023
HARRIER IP CAMERA INTERFACE BOARD
QUICK START GUIDE
Version 1.04 – March 2023
Antenna socket B
WiFi/Wireless module
Antenna socket A
Page 10 of 12