Active Silicon AS-CIB-IP-001-A Snelstarthandleiding - Pagina 8
Blader online of download pdf Snelstarthandleiding voor {categorie_naam} Active Silicon AS-CIB-IP-001-A. Active Silicon AS-CIB-IP-001-A 13 pagina's. Harrier ip camera interface board
Ook voor Active Silicon AS-CIB-IP-001-A: Snelstarthandleiding (7 pagina's)
Pagina afdrukkenControlling the Camera via the Harrier IP Website (Evaluation Only)
For evaluation purposes the Harrier IP Website Maintenance and Camera Control pages provide a simple
way to control the camera:
•
In your web browser, enter: http://<IP Address> to access the website.
•
From the menu on the left-hand side, select the 'Camera Control' page (figure 12)
•
On the page there are buttons for some simple camera commands (e.g. zoom, image flip, etc.) and
a text entry box/submit button for sending VISCA commands to the camera.
•
From the menu select 'Maintenance' to go to the Maintenance web page (figure 13).
•
From here you can reset to default settings, change the video mode and re-boot the camera.
Figure 12. Harrier IP Camera Control web page
The text entry box (see figure 12) allows VISCA commands/inquiries to be sent to the camera, enabling full
control of all camera features (white balance, defog mode, etc.).
Note: the camera resolution and frame rate settings should not be changed using VISCA commands; the
Maintenance web page should be used for this function.
March 2023
HARRIER IP CAMERA INTERFACE BOARD
QUICK START GUIDE
Version 1.04 – March 2023
Page 8 of 12