70mai M500 Gebruikershandleiding - Pagina 4

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} 70mai M500. 70mai M500 11 pagina's. 70mai dash cam
Ook voor 70mai M500: Gebruikershandleiding (5 pagina's)

Pagina afdrukken

4. Pasting the bracket

Rotate the mount of the bracket and make the heat resistant adhesive face toward the

front windshield.

Peel off the protective film from the heat resistant adhesive, and paste the bracket onto

the electrostatic sticker in the dotted area.

Press the bracket to make sure it is firmly attached on the electrostatic sticker.

5. Connecting the power supply

As shown in the figure, run the power cord along the top of the windshield, down the

A-pillar, and around the glove compartment, so that the power connector is near the

cigarette lighter. Connect the power cord to the car charger, then plug the charger into

the cigarette lighter socket.

Notes:

●

Use the included crowbar to hide the power cord underneath the vehicle's headliner and rubber

seal along the A-pillar.

●

Depending on the vehicle, the cigarette lighter socket may be located in a different position.

The figure provided is for reference only.

Adjusting the dash cam angle

Connect the dash cam with the 70mai app following the instructions on the user manual.

Turn on the dash cam and adjust the camera angle based on the preview screen on the

app to ensure that the camera is facing the front of the vehicle.