70mai M500 Kullanıcı Kılavuzu - Sayfa 4

Araç Kameraları 70mai M500 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. 70mai M500 11 sayfaları. 70mai dash cam
Ayrıca 70mai M500 için: Kullanıcı Kılavuzu (5 sayfalar)

70mai M500 Kullanıcı Kılavuzu
4. Pasting the bracket
Rotate the mount of the bracket and make the heat resistant adhesive face toward the
front windshield.
Peel off the protective film from the heat resistant adhesive, and paste the bracket onto
the electrostatic sticker in the dotted area.
Press the bracket to make sure it is firmly attached on the electrostatic sticker.
5. Connecting the power supply
As shown in the figure, run the power cord along the top of the windshield, down the
A-pillar, and around the glove compartment, so that the power connector is near the
cigarette lighter. Connect the power cord to the car charger, then plug the charger into
the cigarette lighter socket.
Notes:
Use the included crowbar to hide the power cord underneath the vehicle's headliner and rubber
seal along the A-pillar.
Depending on the vehicle, the cigarette lighter socket may be located in a different position.
The figure provided is for reference only.
6.
Adjusting the dash cam angle
Connect the dash cam with the 70mai app following the instructions on the user manual.
Turn on the dash cam and adjust the camera angle based on the preview screen on the
app to ensure that the camera is facing the front of the vehicle.
03