GREAT PLAINS BD7600-26 Handleiding voor veldaanpassing - Pagina 9
Blader online of download pdf Handleiding voor veldaanpassing voor {categorie_naam} GREAT PLAINS BD7600-26. GREAT PLAINS BD7600-26 12 pagina's. Box drill
Pagina afdrukkenHow To Fold Drill:
Applies to BD7600(HD)-30 & BD7600(HD)-40
1) Par the tractor and drill on level ground with
enough clearance to fold the drill. Put the tractor in
park.
2) Fold markers, if installed.
3) Position all six opener locks handles (1) in ROAD
position (2) and completely raise the openers.
The opener lock handles are spring loaded and can
be moved to ROAD position with openers up or down,
but the locks only engage when the openers are com-
pletely raised.
4) Make sure the transport lift cylinders and tongue
cylinder are completely retracted (drill is lowered,
transport hook is lowered).
5) Slowly retract the fold cylinders. Completely fold
wing frames until both wing gauge wheels contact the
tongue tube.
How To Raise the Drill For Transport:
1) Extend the transport lift cylinders.
2) Leave the circuit extended until the mainframe lift is
complete, the transport hooks (1) have engaged, the
wing ends are lifted off the ground, and the tongue cyl-
inder (2) is fully extended.
3) Position the transport lift handle (1) down in ROAD
position and lock the transport lock (2) in the latch (3).
The drill is now ready for transport.
Note:
49633
49645
49646
9 of 12
Document
#DRUS400C-0012A