GREAT PLAINS BD7600-26 Instrukcja regulacji w terenie - Strona 9

Przeglądaj online lub pobierz pdf Instrukcja regulacji w terenie dla Wiertarka GREAT PLAINS BD7600-26. GREAT PLAINS BD7600-26 12 stron. Box drill

How To Fold Drill:

Applies to BD7600(HD)-30 & BD7600(HD)-40

1) Par the tractor and drill on level ground with

enough clearance to fold the drill. Put the tractor in

park.

2) Fold markers, if installed.

3) Position all six opener locks handles (1) in ROAD

position (2) and completely raise the openers.

The opener lock handles are spring loaded and can

be moved to ROAD position with openers up or down,

but the locks only engage when the openers are com-

pletely raised.

4) Make sure the transport lift cylinders and tongue

cylinder are completely retracted (drill is lowered,

transport hook is lowered).

5) Slowly retract the fold cylinders. Completely fold

wing frames until both wing gauge wheels contact the

tongue tube.

How To Raise the Drill For Transport:

1) Extend the transport lift cylinders.

2) Leave the circuit extended until the mainframe lift is

complete, the transport hooks (1) have engaged, the

wing ends are lifted off the ground, and the tongue cyl-

inder (2) is fully extended.

3) Position the transport lift handle (1) down in ROAD

position and lock the transport lock (2) in the latch (3).

The drill is now ready for transport.

Note:

49633

49645

49646

9 of 12

Document

#DRUS400C-0012A