Automate AM2 Installatiehandleiding - Pagina 8

Blader online of download pdf Installatiehandleiding voor {categorie_naam} Automate AM2. Automate AM2 18 pagina's.
Ook voor Automate AM2: Gebruikershandleiding (19 pagina's)

Pagina afdrukken

H1/16 ORANGE (-) 500mA Ground-When Armed Output

This wire supplies a (-) 500mA ground as long as the system is armed. This output ceases as soon

as the system is disarmed.

Note: If using the H1/16 Orange wire to activate an add-on accessory such as window automation,

pager or voice module a 1-Amp diode must be installed to ensure proper operation. Insert the diode

as shown in the following diagram.

H1/17 BROWN/BLACK Unlock #87A Normally Closed

See H1/5.

H1/18 RED/WHITE C C h h a a n n n n e e l l 2 2 /Programmable Domelight Supervision, (-) 200ma output

When the system receives the transmitter code controlling Channel 2/Aux for longer than 1.5

seconds, the red/white wire will supply an output as long as the transmission continues. This is often

used to operate a trunk/hatch release or other relay-driven functions. When feature 15 is selected to

Aux channel 2, this output becomes a (-) 200ma domelight supervision output.

IMPORTANT! Never use this wire to drive anything but a relay or a low-current input!

The transistorized output can only supply 200 mA of current. Connecting directly to a

solenoid, motor, or other high-current device will cause it to fail.

2007

Directed Electronics