Emerald Supply 61059 Gebruikershandleiding - Pagina 3
Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Emerald Supply 61059. Emerald Supply 61059 5 pagina's. Selectis alternating pressure pump and mattress
Pagina afdrukken
Product Func ons
Intended Use
The Selec s Serenity Elite pump and ma ress are intended to reduce the incidence of
pressure ulcers while op mizing pa ent comfort. It also provides the following:
Individual home care se ng and long-term care
Pain management as prescribed by a physician
Pump
The func ons of the Serenty Elite pump are described below. Please refer to the
below figures.
5
6
Power Switch(1)
The switch is at the right side of the pump.
Turn ON/OFF the power and press Power buton on the panel, the pump will
start/stop operaton.
Press Cycle Time(2)
·
The cycle me is selectable from the panel.
·
The cycle me value can be either 10, 15, 20, or 25 minutes.
·
Press Pressure Range(3)
·
20mmHg~55mmHg is offered from the panel, providing op
·
value by easy press.
·
Alarm Mute (4)
The audible/visible alarm turns on a er 1 minute when low pressure, power
·
failure or alternate failure.
To mute the audible alarm, press the Alarm Mute buton. The visible alarm
·
indicator will flash l problem solved.
Re-press the Alarm Mute buton to reac ate the alarm.
·
9
7
8
ns of pressure
·
Alternate mode(5)
Press to set the air matress in alternate mode.
·
Statc mode(6)
·
Press to set the air matress in statc mode.
·
·
Max Firm(7)
Press to set the air matress in quick inflaaon mode, which facilitates nursing
·
and caring.
·
Seat Inflate (8)
Press to set the air matress in seat inflate+ alternate or seat inflate+ statc
·
mode, pressure value will increase by 5mmHg, which facilitates sea
Under max firm mode, because the pressure is already set at the largest
·
value, no more 5mmHg will be increased.
Lock buton (9)
·
The panel will automa caly lock in 5 minutes without opera
·
Press the lock buton and hold for 3 seconds, to lock or unlock the panel.
·
Matress
Elite
g.
n.