HIBLOW HP Series Handmatig - Pagina 9

Blader online of download pdf Handmatig voor {categorie_naam} HIBLOW HP Series. HIBLOW HP Series 9 pagina's.
Ook voor HIBLOW HP Series: Handmatig (5 pagina's), Handmatig (8 pagina's), Snelstarthandleiding (7 pagina's)

Pagina afdrukken

HP- 100 / 120

STEP

FITTING THE ELECTROMAGNET

Mount new the electromagnets in the unit.

Tighten up nuts with nut driver.

STEP

Install the SP switch to the frame with the screws.

●Be careful of the direction of switch lever. (Refer to the

pictures)

STEP

Insert the wire into the silicon tube, and tie up in a

bundle.

Strip the coating off each wire.

(5-7mm from the end)

Connect the wires to the terminals.

Solder the wires to the terminals.

The wire requires a soldered connection.

STEP

This completes the electromagnet replacement

procedure.

REPLACING THE ELECTROMAGNET