Automatic DB 5801 Gebruiksaanwijzing - Pagina 8

Blader online of download pdf Gebruiksaanwijzing voor {categorie_naam} Automatic DB 5801. Automatic DB 5801 13 pagina's. 250w multi tool

Accessories

1 x 6 mm Hex key/ Allen Key

1 x Screw

3 x Washers

1 x Plunge cutting saw blade for cutting

softwood, plastic & plasterboard

1 x Scraper blade

1 x Sanding pad (90x90x90mm)

5 x Sanding sheets: 1 x 40 grit, 1 x 60 grit, 1 x

80 grit, 1 x 120 grit, 1 x 240 grit

WARNING: Use only accessories that are

recommended for this oscillating tool.

Follow the instructions that accompany the

accessories. The use of improper accessories

may result in injury to the operator or damage

to the tool.

Before using any accessory, carefully read the instructions

or the owner's manual for the accessory.

WARNING: If any part is missing or damaged,

do not plug the tool into the power source

or install any accessory until the missing or

damaged part is replaced.

Due to modern mass production techniques, it is unlikely

that your AUTOMATIC Power Tool is faulty or that a part is

missing. If you find anything wrong, do not operate the tool

until the parts have been replaced or the fault has been

rectified. Failure to do so could result in serious personal

injury.

1. On/Off switch

2. Plunge cutting saw blade

3. Scraper blade

4. Sanding pad

5. Sandpaper

6. Hex key

7. Screw & washer

8. Washer for blade type accessory

9. Washer for sanding pad