HiBoost F12G-3S-BTW Gebruikershandleiding - Pagina 6

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} HiBoost F12G-3S-BTW. HiBoost F12G-3S-BTW 13 pagina's.

2.6 Install the Server (Indoor) antenna

Connect one end of the coaxial cable to the antenna and the other end to the cellular

booster where it is marked "Indoor".

Place in the outer perimeter of the area the signal needs to beamplified.

2.7 Install your cellular booster

Install the cellular booster in a location that is properly ventilated and not exposed to

excessive heat, moisture and/or direct sunlight. The optimal area would be located

near a power outlet.

It should be mounted in an easily accessible area so it's easy to perform general

maintenance with the coaxial cable connections, dip switch settings and power

adaptor.

Make sure all cables and antennas are securely connected before commissioning the

system.

2.8 Power up your cellular booster

Once all the Following precautions have been taken, power on the cellular booster.

1. Verify that you have left at least 0.5meter of vertical separation space between

the indoor and outdoor antennas.

2. Never point the front of the donor (outdoor) antenna towards the inside of the

server (outdoor)antenna.

3. Verify that the supplied coaxial cables from both the donor (outdoor) antenna

and the server (outdoor)antenna are properly connected to the cellular booster

before powering it up.

4. Carefully plug in the supplied power adaptor into the back of the cellular booster

where it is marked 'DC 12~5V' and connect the other end to a power outlet.

The LED indicator marked power should light up blue.

3 UNDERSTAND THE PORTS,and LED STATUS,MGC

3.1 Repeater ports

Connector

Description

Indoor

SMA‐female connector,for connection to indoor antenna

Outdoor

SMA‐female connector,for connection to outdoor antenna

6 / 13