DaytonAudio MKBOOM Montagehandleiding - Pagina 2
Blader online of download pdf Montagehandleiding voor {categorie_naam} DaytonAudio MKBOOM. DaytonAudio MKBOOM 10 pagina's. Mkboom bluetooth powered speaker kit
Pagina afdrukken
Thank you for purchasing the MKBoom kit. This kit includes an easy to assemble cabinet and high-performance
components that will put a DIY smile on your face no matter your skill level. With a little time and patience, your
finished product will provide years of enjoyment. Please follow these instructions for the best possible results.
Suggested tools and consumables:
•
Drill
•
Rag or paper towels
•
5/64" drill bit
•
Solder
•
Wood clamps (you can never have too many of these)
•
Soldering iron
•
Sanding block and/or electric finishing sander
•
#2 Phillips screw driver
•
Wood glue
•
3mm/1/8" heat shrink tubing
Package contents:
•
MKBoom cabinet
•
2 x Dayton Audio TCP115-4 4" Treated Paper Cone Mid-Bass Woofer 4 ohm
•
2 x Dayton Audio TD20F-4 3/4" Soft Dome Neodymium Tweeter 4 ohm
•
Dayton Audio KAB-250v4 2 x 50W Class D Audio Amplifier Board with Bluetooth 5.0
•
Dayton Audio KAB-BE 18650 Battery Extension Board
•
Dayton Audio KAB-PMV3 Panel Mount with Function, LED, and Install Kit
•
18650 2600mAh Li-Ion Flat Top Battery 3-Pack
•
2 x Press Fit Port Tubes
•
2 x 2-way Pre Wired Crossover Boards
•
PC Board M3 Standoff Kit with 4 pcs 16mm Stud / 4 pcs 10mm Stud / 2 pcs Phillips Screws
•
#6 x 3/4" Deep Thread Pan Head Screws Black 16 Pcs.
•
15V 4A DC Power Supply AC Adapter with 2.1 x 5.5mm Center Positive (+) Plug
Enclosures
:
2