DaytonAudio MKBOOM Instrukcja montażu - Strona 2
Przeglądaj online lub pobierz pdf Instrukcja montażu dla Głośniki DaytonAudio MKBOOM. DaytonAudio MKBOOM 10 stron. Mkboom bluetooth powered speaker kit
Drukuj stronę
Thank you for purchasing the MKBoom kit. This kit includes an easy to assemble cabinet and high-performance
components that will put a DIY smile on your face no matter your skill level. With a little time and patience, your
finished product will provide years of enjoyment. Please follow these instructions for the best possible results.
Suggested tools and consumables:
•
Drill
•
Rag or paper towels
•
5/64" drill bit
•
Solder
•
Wood clamps (you can never have too many of these)
•
Soldering iron
•
Sanding block and/or electric finishing sander
•
#2 Phillips screw driver
•
Wood glue
•
3mm/1/8" heat shrink tubing
Package contents:
•
MKBoom cabinet
•
2 x Dayton Audio TCP115-4 4" Treated Paper Cone Mid-Bass Woofer 4 ohm
•
2 x Dayton Audio TD20F-4 3/4" Soft Dome Neodymium Tweeter 4 ohm
•
Dayton Audio KAB-250v4 2 x 50W Class D Audio Amplifier Board with Bluetooth 5.0
•
Dayton Audio KAB-BE 18650 Battery Extension Board
•
Dayton Audio KAB-PMV3 Panel Mount with Function, LED, and Install Kit
•
18650 2600mAh Li-Ion Flat Top Battery 3-Pack
•
2 x Press Fit Port Tubes
•
2 x 2-way Pre Wired Crossover Boards
•
PC Board M3 Standoff Kit with 4 pcs 16mm Stud / 4 pcs 10mm Stud / 2 pcs Phillips Screws
•
#6 x 3/4" Deep Thread Pan Head Screws Black 16 Pcs.
•
15V 4A DC Power Supply AC Adapter with 2.1 x 5.5mm Center Positive (+) Plug
Enclosures
:
2