GAI-Tronics DEX-201 Handmatig - Pagina 7

Blader online of download pdf Handmatig voor {categorie_naam} GAI-Tronics DEX-201. GAI-Tronics DEX-201 14 pagina's. Hazardous area driller’s intercom stations

Pagina afdrukken

DEX-10

DEX-20

ODEL

X AND

Field Wire Installation

Remove the termination enclosure cover and pull all wiring into the termination enclosure. Make all

connections as described below.

: All field wiring is to be completed in the termination enclosure (bottom enclosure) only.

OTE

Figure 4. DC Model Installation Diagram (See note below.)

Figure 5. AC Model Installation Diagram (See note below.)

: Consult the National Electrical Code (NFPA 70), Canadian Standards Association (CSA 22.1),

OTE

and local codes for the specific requirements regarding your installation. Install all equipment without

modification and according to the local and national codes. Install conduit and seals where required.

Class 2 circuit wiring must be performed in accordance with NEC 725.55.

f:\standard ioms - current release\42004 instr. manuals\42004-679l2d.doc

10/10

RILLER

NTERCOM

TATIONS

Pub.: 42004-679L2D

Page 6 of 13