80/20 Xtreme DIY Montagehandleiding - Pagina 4

Blader online of download pdf Montagehandleiding voor {categorie_naam} 80/20 Xtreme DIY. 80/20 Xtreme DIY 6 pagina's. Entryway bench

Build the back of the bench connecting profile A

(2) using profile G (1) and anchor fasteners (2).

Next, connect bottom support profile D (1)

to same profiles using anchor fasteners (2).

Attach profile H(2) to adjacent T-slot of profiles

A using anchor fastener (2). Slide profile F (2) to

bottom of profiles A using anchor fasteners (2).

See figure 1

for reference.

P a n

Figure 2

ASSEMBLY INSTRUCTIONS

e l K

Furniture Glides

Next build the front bench subassembly.

Connect profile E (2) using profile G (1) and

anchor fasteners (2). Attach bottom support

profile D (1) using anchor fasteners (2).

Install panel gasket into T-slot of all four

sides for bottom shelf. Slide panel K (1) into

same T-slots on back bench subassembly.

Bring two subassemblies together attaching

front of bench using anchor fasteners (4).

Thread furniture glides (4) into bottom of

assembly and stand it up.

Figure 1

See figure