80/20 Xtreme DIY Montagehandleiding - Pagina 5

Blader online of download pdf Montagehandleiding voor {categorie_naam} 80/20 Xtreme DIY. 80/20 Xtreme DIY 6 pagina's. Entryway bench

Figure 3

P a n

Build the hanger section of the bench

by attaching profile C (2) together using

profile J (7) and FBHSCS (14). Connect

the hanger section between A profiles

using anchor fasteners (4) and tighten

down at desired height.

Cap off A profiles with profile G (1) using

anchor fasteners (2).

Attach panel M (1) to top of build using

FHSCS (6).

See figure

Important:

The maximum weight capacity for bottom wire mesh

panel is 50 pounds. The maximum capacity for the

bench top panel is 400 pounds. The top shelf panel has

a maximum capacity of 100 pounds.

ASSEMBLY INSTRUCTIONS

e l L

For the bench top subassembly

attach profile B (2) and profile I (2) to

each side of panel L (1) using FHSCS

(4). Connect B profiles using profile G

(1) and anchor fasteners (2).

Connect subassembly to build using

FHSCS (2) in front uprights of bench.

See figure

P a n

Figure 4

e l M