Dynalink QWLL100 Handleiding voor snelle installatie - Pagina 3

Blader online of download pdf Handleiding voor snelle installatie voor {categorie_naam} Dynalink QWLL100. Dynalink QWLL100 8 pagina's. Wlan usb adaptor

Pagina afdrukken

Browse to D:\2KXP (Substitute D: with your CD drive letter). Wait for Windows

to finish copying files. Click Finish to complete installation.

Windows 98

Windows will display an Add New Hardware Wizard. Click Next and select Search

for the best driver for your device (Recommended) – Next. Tick the CD-ROM

drive option. Click Next to allow Windows to search and copy files from the CD.

You may need the Windows 98 CD to complete the driver installation. Then click

Finish to complete and OK to restart your computer.

Windows ME

Windows will display an Add New Hardware Wizard. Select Specify the location

of the driver (Advanced) – Next. Tick the Specify a location box. Browse to D:\ME

(Substitute D: with your CD drive letter) – Next to and copy files from this folder.

Then click Finish to complete and OK to restart your computer.

Both the device driver and wireless configuration utility have been loaded into

your computer. Now follow the next section to configure the adaptor properties.

Configuring the Wireless Adaptor

Before you start you should know:

The type of network you are connecting to, infrastructure or ad-hoc.

The SSID of the network you are connecting to.

The SSID is already determined on an existing network by the network

administrator. You should set up your

adaptor in order to comply. Only when

you are setting up a new network,

there is the option on choosing SSID.

Windows 2000, Windows ME or

Windows 98 users should now follow

section 3.2.

3.1

IMPORTANT NOTE FOR WINDOWS XP

Windows XP comes with a built in

Wireless Network Connection utility

for wireless adaptor configuration.

After completing the steps in section

2, both the Windows built in wireless

network utility and the manufacturer's

wireless configuration utility are active.