Dynalink QWLL100 Podręcznik szybkiej konfiguracji - Strona 3
Przeglądaj online lub pobierz pdf Podręcznik szybkiej konfiguracji dla Router bezprzewodowy Dynalink QWLL100. Dynalink QWLL100 8 stron. Wlan usb adaptor
Drukuj stronęBrowse to D:\2KXP (Substitute D: with your CD drive letter). Wait for Windows
to finish copying files. Click Finish to complete installation.
Windows 98
Windows will display an Add New Hardware Wizard. Click Next and select Search
for the best driver for your device (Recommended) – Next. Tick the CD-ROM
drive option. Click Next to allow Windows to search and copy files from the CD.
You may need the Windows 98 CD to complete the driver installation. Then click
Finish to complete and OK to restart your computer.
Windows ME
Windows will display an Add New Hardware Wizard. Select Specify the location
of the driver (Advanced) – Next. Tick the Specify a location box. Browse to D:\ME
(Substitute D: with your CD drive letter) – Next to and copy files from this folder.
Then click Finish to complete and OK to restart your computer.
Both the device driver and wireless configuration utility have been loaded into
your computer. Now follow the next section to configure the adaptor properties.
3
Configuring the Wireless Adaptor
Before you start you should know:
1.
The type of network you are connecting to, infrastructure or ad-hoc.
2.
The SSID of the network you are connecting to.
The SSID is already determined on an existing network by the network
administrator. You should set up your
adaptor in order to comply. Only when
you are setting up a new network,
there is the option on choosing SSID.
Windows 2000, Windows ME or
Windows 98 users should now follow
section 3.2.
3.1
IMPORTANT NOTE FOR WINDOWS XP
Windows XP comes with a built in
Wireless Network Connection utility
for wireless adaptor configuration.
After completing the steps in section
2, both the Windows built in wireless
network utility and the manufacturer's
wireless configuration utility are active.