Dynalink QWLL100 Podręcznik szybkiej konfiguracji - Strona 5

Przeglądaj online lub pobierz pdf Podręcznik szybkiej konfiguracji dla Router bezprzewodowy Dynalink QWLL100. Dynalink QWLL100 8 stron. Wlan usb adaptor

Drukuj stronę
3.2.2
CONNECTING TO OTHER WIRELESS ACCESS STATIONS
The procedure is the same as the previous section except:
In Mode, select 802.11 AdHoc. In Channel, select the channel number desired.
1.
2.
In SSID, enter the SSID. All wireless stations should use the same SSID.
The wireless link quality indicators are not available for this mode of operation.
If the wireless network has security features enabled, configuration is not
complete at this stage. Please proceed to section 4 for setting up wireless privacy.
3.3
USING THE WINDOWS XP BUILT IN WIRELESS CONFIGURATION UTILITY
You may choose the Windows built in Wireless Network Connection utility for
configuration and monitoring. The utility can be accessed via the Network
Connection icon on the system tray.
Double click the Network Connection icon to open the Connect to Wireless
1.
Network window. You will see all the access points or wireless stations that
are available.
Select the access point or wireless station you intend to join.
2.
3.
If the target network has been set with WEP, you must enter the same WEP
key in the Network key field. Otherwise leave blank. If WEP is not used, tick
the Allow me to connect... box
4.
Click Connect to join the target network.
After successful connection to the target network, double-click the icon on the
system tray again. The Wireless Network Connection Status window displays
the link status.
If the wireless network has security features enabled, configuration is not
complete at this stage. Please proceed to section 4 for setting up wireless privacy.
4
Setting Up Wireless Privacy
4.1
WEP
WEP is for protection against eavesdropping and prevention of access from
unauthorised wireless stations. Both 64-bit and 128-bit encryptions are supported.
The 128-bit option is more secure but it impacts more on the effective throughput
of the network than the 64-bit option.
The WEP setting is already determined on an existing network by the network
(ADHOC OR PEER-TO-PEER MODE)