Automation Networks Highway Plus ANC-100e Gebruikershandleiding - Pagina 16

Blader online of download pdf Gebruikershandleiding voor {categorie_naam} Automation Networks Highway Plus ANC-100e. Automation Networks Highway Plus ANC-100e 19 pagina's. Ethernet to data adapter

Pagina afdrukken

1. Configuration and Interface

ANC-100e

Ethernet to DH+ Adapter

Turn ON the first row in the ANC-100e's "HMI" tab in the web interface

Enter an IP address that is not being used (keep in mind that it has to be in the same

network the ANC-100e is) and enter the DH+ node of the device that you are connecting to

You can repeat steps 1 and 2 for each row to communicate with up to 5 DH+ devices if

necessary, using a different IP address in each row

Click "Apply" and wait for the unit to reboot (5 seconds)

PanelView will be able to communicate to each IP address directly, and the ANC- 100e will forward the packets to

the specified DH+ node

In the Panel View configuration, you must add a PLC or SLC device from the "Ethernet SLC

devices" or "Ethernet PLC devices" folders, depending on what is the target on the DH+

network.

User Manual 16