Automation Networks Highway Plus ANC-100e Podręcznik użytkownika - Strona 16
Przeglądaj online lub pobierz pdf Podręcznik użytkownika dla Adapter Automation Networks Highway Plus ANC-100e. Automation Networks Highway Plus ANC-100e 19 stron. Ethernet to data adapter
Drukuj stronęANC-100e
Ethernet to DH+ Adapter
1.
Turn ON the first row in the ANC-100e's "HMI" tab in the web interface
2.
Enter an IP address that is not being used (keep in mind that it has to be in the same
network the ANC-100e is) and enter the DH+ node of the device that you are connecting to
3.
You can repeat steps 1 and 2 for each row to communicate with up to 5 DH+ devices if
necessary, using a different IP address in each row
Click "Apply" and wait for the unit to reboot (5 seconds)
2
PanelView will be able to communicate to each IP address directly, and the ANC- 100e will forward the packets to
the specified DH+ node
4.
In the Panel View configuration, you must add a PLC or SLC device from the "Ethernet SLC
devices" or "Ethernet PLC devices" folders, depending on what is the target on the DH+
network.
©Automation Networks & Solutions LLC. 2016
User Manual 16
1