Hidro-Water NELVA Handmatig - Pagina 6

Blader online of download pdf Handmatig voor {categorie_naam} Hidro-Water NELVA. Hidro-Water NELVA 17 pagina's.

c. Connect the ⅜" tube (Figure 3) to the pressure reducer outlet (Figure

10); to do so, you must remove the blue security clip which is on the out-

let of the pressure reducer and insert the tube fully. Once you have in-

troduced the ⅜" tube, replace the ⅜" plastic clip.

d. You must connect the other end of the ⅜" tube to the inlet of the WA-

TER STOP Antileak system (Figure 8) where it's marked "IN", inserting it

fully. Once inserted, place the ⅜" security clip on it (figure 9).

e. The WATER STOP Antileak system (Figure 8)

must be fixed to the base of the place where

you've decided to put the ultrafiltration system.

To do so, you must use the double-sided tape

that is supplied inside the WATER STOP An-

tileak system box.

Once the WATER STOP Antileak system have been fixed to the chosen

place, you must connect the ⅜" tube to the WATER STOP Antileak out-

let (Figure 8) where it's marked "OUT" fully. Once inserted, place the ⅜"

security clip on it (figure 9).

g. You must connect the other end of the ⅜" tube to

the ultrafiltration system (Figure 1) where it's

marked "ENTRADA" (Inlet). To do so, you must

unscrew the straight nut on the system's inlet.

Then insert the ⅜" tube through the nut and place

a plastic insert (Figure 6) in it. Screw the nut back

on the straight on the ultrafiltration system's inlet.

h. Screw the faucet adapter (figure 7) to the faucet placing the

supplied O-Ring between the adapter and the stud. Insert ⅜"

tube through this adapter's nut and ⅜" sleeve then insert a

⅜" plastic insert (Figure 6) in that end on the tube. Then you

must insert that end in the faucet's adapter and tighten the

nut with the help of a wrench (Our reference: OI-0207-128,

not supplied with the system) or a spanner.